Speed Setup - Mercury VesselView 7 Manual

A fuel capacity screen will display the total capacity based on input data.

Speed Setup

In the Speed Setup screen, there are three options for determining how VesselView will acquire speed information. If the vessel
is equipped with a GPS, the drop‑down menu will allow selection of available devices. If the vessel is equipped with a pitot
sensor, this option will be selected. If the vessel is equipped with a paddle wheel, then an option to select will drop down. After
the speed source has been selected, touch Next to continue.
If the pitot source was selected, a Pitot Speed Sensor screen will appear. Use the Pitot Sensor Type drop‑down to select the
appropriate option. Most engines utilize a 100psi pitot. Products from Mercury Racing will utilize the 200psi pitot. After
selection, touch Next to continue.
90-8M0087258 DECEMBER 2014
eng
a
a
b
c
a
Section 2 - Initial Screens and Setup Wizard
a - Fuel capacity field
56756
a - GPS source field
b - Pitot source field
c - Paddle wheel source field
56757
a - Pitot pressure field
56758
Page 17