Navigation Of Data Fields; Enlarging Data Fields - Mercury VesselView 7 Manual

Navigation of Data Fields

The user‑selected data area shares its space with initial start‑up scan progress, good stewardship messages, maintenance
schedule, and warnings. Specific data regarding the boot‑up progress, changes with the power package, or if warnings are
encountered, is displayed during these events.
Data Field Size Definitions
a
b
c
d

Enlarging Data Fields

Data fields can be enlarged by highlighting the expand (X‑PAND) icon and pressing the rotary knob.
After the icon is activated, the user‑selected data area will be filled with the enlarged data from the actively displayed data
selection. Up to six data selections can be enlarged, one at a time, and will cycle in the chronological sequence shown in the
following illustration. Data fields 3 and 4 will only display the optional user‑selected data.
90-8M0087258 DECEMBER 2014
eng
b
a
Level 4 is a full‑screen field size that occurs when pop‑up warnings are encountered.
Level 3 is a standard screen field size that occurs when pop‑ups for the power package or vessel
change. Changes may include, but are not limited to, trim, navigation, ECO, and fuel.
Level 2 is a standard screen field size for all of the data fields.
Level 1 is a standard screen field size for all data fields which will include the start‑up system scan.
Section 3 - Screen Overview and Operation
d
c
52094
Expand icon
51654
Page 31