Section 2 - Initial Screens and Setup Wizard
VesselView 7 Startup Warning Screen
When VesselView 7 is started, a warning screen pops up and advises the operator not to rely on the product as a primary
source of navigation and that the user assumes all liability for operation and associated risks.
Splash Screen
When the ignition key is turned on, a Mercury startup splash screen will appear. The number of engine hours will be displayed
for up to four engines. In the lower right‑hand corner of the screen is the software version. Power packages with emissions
control will show an engine icon in the lower left‑hand corner of the screen.
Setup Wizard
IMPORTANT: Do not rush VesselView by pressing buttons while the system is booting up to acquire vessel and engine data.
When VesselView is initially started or after a factory reset, the system will take a few seconds to complete the boot up
process.
The VesselView setup wizard guides you through the first steps of configuring the VesselView. The setup wizard can be
accessed at any time through the SETTINGS icon in the scroller menu. Touch the scroller bar arrow and swipe to the Settings
icon. To start the setup wizard, navigate to Settings>System>Setup Wizard. Touch Next to continue.
Page 12
Mercury splash screen
51617
56740
90-8M0087258
eng
DECEMBER 2014