Rear Panel - Mercury VesselView 7 Manual

MARK–MENU: The MARK–MENU has two functions and is dependent on which screen mode is active. Press the MARK–
MENU button while the chartplotter is visible to access waypoints and other functions. Press the button while SmartCraft
information is visible to open the scroller bar.
STBY–AUTO: Allows the operator to suspend (standby) or engage Navico
Exit: Closes a menu and removes the cursor from the screen.
Rotary knob: Used for maneuvering in menus, zooming in charts, and can be pressed to enter a selection.
GO TO–PAGES: A short press displays the home panel pages and can be pressed multiple times to toggle through the home
page menus. A long press displays the Go To menu options.
IN OUT–MOB: Zoom buttons for various NMEA backbone components. Pushing the IN and OUT buttons at the same time will
mark the position of the vessel with a man overboard (MOB) icon.
Power–Standby–Brightness: Press once to access the standby mode, change the backlighting of the unit, or go to Night
mode.
Card reader: Allows VesselView software to be upgraded, to have navigation charts uploaded, and waypoints and settings to
be saved.

Rear Panel

Item
a
b
c
d
e
90-8M0087258 DECEMBER 2014
eng
a
Function
SmartCraft
Power
Video in
SIMNET/NMEA 2K
Network
®
systems operation.
c
b e
d
Description
Connects to the SmartCraft network, links SC 100 gauges
Power input and external alarm
Provides two composite video inputs
Connects to NMEA 2K network
Ethernet network ports
Section 1 - Getting Started
52298
Page 3