Trip Data - Mercury MercMonitor Manual

Some 4‑Stroke power package
models can estimate the amount of
time the engine has run since the
last scheduled maintenance.
Normal scheduled maintenance for
the engine is every 100 hours. The
maintenance screen shows a bar
graph approximating the amount of
time remaining before a scheduled
maintenance is required. When the
maintenance screen is reset, the
Maintenance
bar graph will change to 100 hours
before the next scheduled
maintenance. The maintenance
screen must be turned on for this
screen to be displayed. Your
owner's manual maintenance
schedule should be followed
regardless of what the gauge
displays. To turn this feature on,
refer to Section 7: Settings—
Turning the Screens On.

Trip Data

The Trip Data screen displays the current vessel speed. This data is based on
which sensor is active; pitot sensor, paddle wheel, or GPS. The type of speed
sensor is displayed on the right side of the Speed information window. When
the transition speed is reached, the new active speed sensor will then be
displayed.
The trip distance—Trip Dist will display how far the vessel has traveled. The trip
distance can be reset.
The total fuel used—Total Used is the total of all the engines running on the
vessel, displaying how much fuel has been used down to a tenth of the unit.
The total fuel used can be reset.
eng
VESSEL MENU
59
Maintenance
OK
Scheduled Maintenance
GEN. MAINTENANCE
[ EXIT ]
OK
50377