Smart Tow User-Selected Data Area; Navigation - Mercury VesselView 7 Manual

RPM Set Point Target
State
Set‑up point
Active
When Smart Tow is not active, the RPM sweep display is white. Smart Tow will modify the color of the RPM sweep display to
orange when active.
Smart Tow User‑Selected Data Area
The default Smart Tow screen allows you to select, set, and modify settings in the Smart Tow features. The launch graph dot is
animated when Smart Tow is active and performing a launch sequence. The dot will move along the launch path showing what
part of the launch sequence the system is performing.

Navigation

Smart Tow utilizes the user‑selected data area and the footer section to allow you to adjust the settings. Touch or swipe to
move through the selection box fields. The footer section allows you to enable or disable Smart Tow, save, or exit.
There are five selection fields. Use the rotary knob or swipe to scroll through the profile selection, RPM/speed set point, and
enable/disable.
90-8M0087258 DECEMBER 2014
eng
Color
Orange
Orange
Active RPM sweep display color is orange
Launch graph animated dot
Section 3 - Screen Overview and Operation
File value
Outline
Solid
56976
2
LAUNCH
52188
Image
52182
52183
Page 39