Vessel; Smartcraft - Mercury VesselView 7 Manual

9. Turn on or off the startup check list
10. Turn on or off the trim tab display
11. Select the type of cruise or SmartTow control.
The greater‑than sign ( > ) indicates additional menu choices
Engines >
Helm Number, Device
Number >
Visible from Helm >
Ambient Temperature Sensor
>
Auto‑cycle Interval >
Pop‑ups >
Data Boxes >
Scroller Bar >
Startup checklist
Show tabs
Show trim
Show steering
Camera installed

Vessel

Vessel allows the operator to assign the number of engines, the number of fuel tanks and the total fuel capacity. The fuel
capacity can also be reset after refueling.
The greater‑than sign ( > ) indicates additional menu choices.
Setup > Vessel Setup >
Refuel > Vessel Refuel >

SmartCraft

The SmartCraft settings menu allows you to:
1. Select the number of engines on the vessel
2. Offset sensor data: depth, sea temperature, speed, steering, trim, tabs
3. Set the tanks' capacity
90-8M0087258 DECEMBER 2014
eng
Preferences
Turn on (check mark) or off (no checkmark)
depending upon which engine is displayed
Select the helm location of the VesselView
(required if there is more than one helm).
Select a unique device number (required if
more than one VesselView is installed).
On (checkmark) or off (no checkmark)
On (checkmark) or off (no checkmark)
1, 5, or 10 seconds
Trim
Trim popup time
Choose type of data for data box 1 >
Optional data boxes >
Choose type of data for data box 2 >
Auto‑hide delay >
Item Visibility >
On (checkmark) or off (no checkmark)
On (checkmark) or off (no checkmark)
On (checkmark) or off (no checkmark)
On (checkmark) or off (no checkmark)
On (checkmark) or off (no checkmark)
Number of engines, number of fuel tanks
Vessel total fuel capacity
Enter the amount of fuel added and set to full
On (checkmark) or off (no checkmark)
Select 2, 5, 10 seconds
Navigation >, Vessel >, Engine >,
Environment >
None, One, Both
Navigation >, Vessel >, Engine >,
Environment >
Select 5, 10, 15, or 30 seconds
On (checkmark) or off (no checkmark):
X‑PAND, temperatures, pressure, tanks,
voltages, fuel, ECO, cruise, navigation, trip
log, SmartTow, troll control, engine,
generator, performance, and trim and tabs,
autopilot

Vessel

Section 4 - Setup and Calibrations
Page 49