User-Selected Data Area; Final User-Selected Data Selection - Mercury VesselView 4 Manual

NOTE: An arrow icon will appear to the left and right of the scroller bar. When only one arrow icon is visible, you must use
the indicated arrow button to move the selection. When both arrows are visible, either arrow button can be used.
User‑Selected Data Area
During the scroller bar navigation process, when the icon is highlighted and the enter button is not pressed, the user‑selected
data area will change to display the icon, the icon name, and description of what the feature does. The user‑selected data area
will show this information for a short time only.

Final User-Selected Data Selection

When the icon has been selected, press the enter button. The icon will show up next to the system status field and the
user‑selected data area will display the full data pertaining to that selection.
90-8M0087257 DECEMBER 2014
eng
b
Section 3 - Screen Overview and Operation
a - Selected icon
b - Scroller bar arrows
a
52051
Page 27