Finishing Setup Wizard; Data Source Setup - Mercury VesselView 7 Manual

Section 2 - Initial Screens and Setup Wizard
If the paddle wheel source was selected, the Paddle Wheel Sensor screen will appear. Use the Paddle Wheel Sensor Type
drop‑down to select the appropriate option. After selection, touch Next to continue.

Finishing Setup Wizard

Touch Finish to complete the Setup Wizard on the VesselView. Do not power off the unit until the Finish screen is replaced by
the vessel activity screen.

Data Source Setup

VesselView will ask to setup detectable data sources. Touch OK to continue
Page 18
a
56759
a - Paddle Wheel Sensor Type field
56760
56761
90-8M0087258 DECEMBER 2014
eng