Depth Alarm - Mercury VesselView 7 Manual

• The operator can also select the fuel warning as a user‑selected data area pop‑up in the Settings menu. Pressing the
rotary knob will minimize the fuel level alarm. The fault will still be displayed in one of two locations, depending on the
screen set‑up.

Depth Alarm

The depth alarm is managed by VesselView, not by the engine ECM/PCM.
• Display notification properties and depth warning levels can be set in the Settings menu.
• If the operator has depth selected as a constant data field in location #1 (refer to Screen Display Locations and
Descriptions), then the depth data field will show the warning.
• The warning icon will replace the depth icon and the data box will change between the black field and a red field.
• If the operator does not have depth selected as a constant data field (location #1), but it is active as a warning fault, then
the system status field will display a red field and show DEPTH.
• The operator can also show the depth warning as a user‑selected data area pop‑up in the Settings menu. Pressing the
rotary knob will minimize the data panel. The fault will still be displayed in one of two locations depending on the screen
set‑up.
90-8M0087258 DECEMBER 2014
eng
Section 5 - Warning Alarms
52276
Page 57