Convection Fan Motor - LG LRG30855S Series Training Manual

CONVECTION FAN MOTOR

GAS RANGE
1. Remove the oven door.
(Page 18.)
2. Remove six Phillips screws that
secure the convection fan guard
to the back wall of the oven.
Then remove the fan guard.
3. Use a ½" wrench to remove the nut
from the convection fan blade. Hold
the blade securely and turn the nut
clockwise.
NOTE! This nut has a left handed thread.
4. Remove the fan blade and washer
from the motor shaft.
5. Remove the four Phillips screws
that attach the motor to the back of
the range and remove the motor.
6. Disconnect the 3-wire connector
from the motor.
7. Remove the six Phillips screws that
mount the motor frame to the range.
Then remove the motor.
Page 31 of 72 TRAINING MANUAL