Table of Contents
Advertisement
GAS MANIFOLD
WARNING!
To remove the gas manifold:
1.
Remove the maintop. (See page 21.)
2.
Remove the two ¼" hex head screws that attach the shield to the top right
side of the manifold panel.
3.
Remove the ½" nut that holds the inlet tube to each valve.
13
4.
Using a
/
16
tube from the gas manifold.
5.
Remove the left and right rear burner knobs then remove the four Phillips
head screws from the front of the manifold panel.
6.
Remove the two ¼-in. hex-head screws that attach the gas manifold to
the range.
7.
Remove the five burner valves from the gas manifold.
GAS RANGE
Shut off the gas before proceeding.
" open-end or adjustable wrench, disconnect the gas inlet
Page 41 of 72
TRAINING MANUAL
Advertisement
Table of Contents
