MAIN TOP REMOVAL
SIDE PANEL REMOVAL
GAS RANGE
Remove the grates, burner caps,
burner heads, igniters, and the T-15
®
Torx
screws from the cooktop.
Insert a putty knife under the edge of
the main top press the clips and allow
removal of the main top.
1.
Remove the range from its
installation.
2.
Remove the door. (Page 18.)
3.
Remove the warming drawer.
(Page 19.)
4.
Remove the main top.
(Page 21, above.)
5.
Remove six Phillips screws from
the top of the side panel.
6.
Remove the Phillips screw from
the front panel under the hinge.
7.
Remove four ¼" hex head
screws from the back edge of
the side panel.
8.
Slide a putty knife into the side
panel under the manifold panel
and gently pry the side panel off
the snap fastener.
Page 21 of 72
TRAINING MANUAL