Bake Burner And Ignitor - LG LRG30855S Series Training Manual

BAKE BURNER AND IGNITOR

NOTE!
When replacing the bake burner, be sure the orifice hood is inserted correctly
into the burner inlet opening.
GAS RANGE
1. To remove the bake burner ignitor,
remove the oven door. (Page 18.)
2. Remove the warming drawer.
(Page 19.)
3. Remove the bottom pan by removing
two screws, lifting the back of the
pan, and sliding the pan back until it
can be removed from the oven.
4. Remove the two hex head screws
that hold the ignitor to the bake
burner.
5. Disconnect the ignitor wires located
behind the warming drawer. Gently
pull the connector through the oven
floor and remove the ignitor.
6. Remove the hex head screw that
holds the front of the burner in place.
7. Remove the two hex head screws,
located behind the warming drawer,
that hold the burner in place and then
remove the burner.
Page 27 of 72 TRAINING MANUAL