Removing The Convection Fan Blade And Fan Motor - LG LRE3061ST Service Manual

REMOVING THE CONVECTION, FAN BLADE AND FAN MOTOR
1. Disconnect power and remove oven racks.
2. Pull the range out of its mounting location so that you can access the
rear of the unit.
3. To remove the convection heater,
Remove 4 screws and detach the
fan cover.
Fan cover
4. Remove 3 screws and pull the
convection heater forward.
Disconnect 2 wiring receptacles
and the heater can be detached
from range for service.
Convection heater
5. To remove the fan blade, Remove
1 nut, 1 washer, fan blade and 1
washer.
* Remove the nut by screwing
clockwise. The fan blade can be
replaced from inside oven.
COMPONENT ACCESS
• Be careful when you work on the electric range
- Sharp edge may be present and you can cut yourself.
6. To remove the fan motor assembly,
a) Remove lamp, controller and back cover
b) Remove 3 screws from the fan motor
c) Pull the fan motor out of the rear panel
-3-8-
CAUTION
handling the sheet metal part.
(See the page 3-2)
bracket and disconnect 2 wiring
connections.
and the motor can be detached.
Fan cover
Conv. heat
screws (2ea)
Fan cover screws (4ea)
Mounting
Rear-fan
Fan
screws (3ea)
Spring
blade
blade
washer
Fan motor
Bushing
Flat
Nut
Washer
Cavity