Oven Temperature Sensor - LG LRG30855S Series Training Manual

OVEN TEMPERATURE SENSOR

GAS RANGE
1. Remove the oven door. (Page 18.)
2. Remove the two ¼" hex head
screws that secure the wiring cover
on the back of the range.
3. Disconnect the sensor wire
harness.
4. Remove the two ¼" hex head
screws that attach the sensor to
the oven wall.
5. Gently pull the sensor wire in to the
oven cavity.
NOTE! When replacing the sensor,
use a small flat-blade
screwdriver to push and
guide the sensor wire
harness into the oven liner.
NOTE! When replacing the oven
temperature sensor, the
connector end must be
positioned OUTSIDE the
range insulation. The
insulation should be allowed
to fill around the lead wires to
protect the sensor from any
heat loss at the opening.
Page 33 of 72 TRAINING MANUAL