Probe; Warming Drawer - LG LRG30855S Series Training Manual

PROBE

The probe allows a reading of the internal temperature of the food during cooking.
Insert the probe into the food (typically a large roast or portion of meat) and plug
it in to the socket in the oven.
1. Insert the probe into the food.
2. Plug the probe into the socket inside the oven.
3. Touch PROBE.
4. Touch the number pads to set the desired internal temperature of
the food between 100° F (38° C) and 200° F (93° C).
5. Touch BAKE.
6. Touch the number pads to set the desired oven temperature.
7. Touch START.
8. When the internal temperature of the food reaches the setpoint, the
oven turns off and the buzzer sounds. To stop the buzzer, touch
CLEAR/OFF.
If the probe is removed from the food before the setpoint is reached, the buzzer
sounds and the display flashes until the probe is removed from the socket. You
can use the timer even though you cannot use timed oven functions while using
the probe.
To avoid damaging the probe, be certain the food is defrosted before inserting
the probe. It should not touch bone, fat, or gristle. When removing the probe, use
a hot pad rather than tongs to avoid damage. Never leave the probe in the oven
during a self-clean cycle.

WARMING DRAWER

The warming drawer uses a 500-watt, 110 V
Always start with hot food. Do not use the warming drawer to heat cold food.
Allow approximate 25 minutes for the warming drawer to preheat. Do not put
liquids, water, or aluminum foil in the warming drawer. The warming drawer
cannot be used during a self-cleaning cycle.
GAS RANGE
electric element.
AC
Page 13 of 72 TRAINING MANUAL