Table of Contents
Advertisement
The lift has twelve lubrication points: two for each cylinder and four on the lift arm:
(See the oval images below with black frames). On these images shows the lubrication
points on the lift's right side and is represented with black numbers (1-6).
On the left side of the lift are the lubrication points mirrored, and is represented in text and
images below with red numbers (7-12).
Note!! On this tail lifts the slide system are lubrication free
3,
9
1,
7
Liftarm against
platform and lift
cylinder.
Operate the lift to working position and
higher it so the liftarm will be horizontal.
Tilt up the platform as much as possible.
See image to the right.
Lubricate all the points except points 3
and 9, that can be hard to reach in this
mode.
SZL/SZN-1500/2000
Tilt cylinder against
platform (View from
behind with horizontel
platform)
2,
8
Lift cylinder against
support frame.
(View from behind)
Tilt down the platform and fold out
the platform, see image to the left,
this for better reach the lubrication
points 3 and 9.
17
IE-0101
Tilt cylinder and liftarm
against support frame.
(View from above)
5,
4,
10
6,
12
.
11
Hide quick links:
Advertisement
Table of Contents
