Table of Contents
Advertisement
IE-0101
The lift has twelve lubrication points: two for each cylinder and four on the lift arm:
(See the oval images below with black frames). On these images shows the lubrication
points on the lift's right side and is represented with black numbers (1-6).
On the left side of the lift are the lubrication points mirrored, and is represented in text and
images below with red numbers (7-12).
2,
8
6,
12
(1.)
(2.)
(3.)
Lowering the lift in the approximate location
shown on the image to the right. Lubricate
all points once again (not the points 1,
3, 9).
Z 100
Tilt the platform a little to avoid pressure against the
body work. Start by greasing points 1,
position (1) and (2)
(See picture to the left.)
Tilt the platform further to position (3) a maximum of 10 °
below the horizontal, and the lubricate points 1,
time. If you are able, lubricate even points 3,
points are now clear.
Then lubricate the remaining grease points once.
7
and
Lowering the lift in the approximate location
shown on the image to the left. Lubricate all
points once again (not the points 1,
9).
8
4,
10
5,
1,
3,
9
7
and 3,
9
in
7
a third
9
These
7
and 3,
11
7
Hide quick links:
Advertisement
Table of Contents
