Table of Contents
Advertisement
Z/ZL/ZN/ZU/ZLU/ZNU 45/75
The lift has twelve lubrication points: two for each cylinder and four on the lift arm:
(See the oval images below with black frames). On these images shows the lubrication
points on the lift's right side and is represented with black numbers (1-6).
On the left side of the lift are the lubrication points mirrored, and is represented in text and
images below with red numbers (7-12).
(1.)
(2.)
(3.)
Lowering the lift in the approximate location
shown on the image to the right. Lubricate
all points once again (not the points 1,
3, 9).
2,
8
6,
12
Tilt the platform a bit to avoid pressure against the body
work. Start by lubricating the points 1,
position. (1.) Tilt the platform to the position (2.) and lubricate
the same points, tilt the platform further to the (3.) and
lubricate the same points for a third time. (See image to the
left.) These items are now ready.
Lower the lift until it just comes to lubrication points 5 and 11.
Lubricate then remaining lubrication points.
7
and
4,
10
Lowering the lift in the approximate location
shown on the image to the left. Lubricate all
points once again (not the points 1,
9).
7
IE-0101
5,
11
3,
9
1,
7
7
and 3,
9
in the up
7
and 3,
Hide quick links:
Advertisement
Table of Contents
