Table of Contents
Advertisement
The lift has eight lubrication points: two for each cylinder: (See the oval images below with
black frames). On these images shows the lubrication points on the lift's right side and is
represented with black numbers (1-4).
On the left side of the lift are the lubrication points mirrored, and is represented in text and
images below with red numbers (5-8).
Note! The liftarm has lubrication free axles. Both against the support frame and against the
platform.
2,
6
Pull the spring-loaded locking rod, and lock the
rod in approved holder, see picture to the right:
Arrow 1 (pulling direction) arrow 2 (holder).
Lower the lift to the ground, see picture to the
right, and the lubricate the points (3, 7) and
(4, 8) once again.
ZKZ 1500
3,
7
1
Unfold the platform from the lift arm, once is
enough, and run the lift arm toward the top, see
picture to the left. Lubricate all grease points in
this mode.
13
4,
8
2
IE-0101
1,
5
Hide quick links:
Advertisement
Table of Contents
