10/15/20 - 130/150 - Zepro ZHD 1500 Service Instruction

The lift has twelve lubrication points: two for each cylinder and four on the lift arm:
(See the oval images below with black frames). On these images shows the lubrication
points on the lift's right side and is represented with black numbers (1-6).
On the left side of the lift are the lubrication points mirrored, and is represented in text and
images below with red numbers (7-12).
1, 7
2, 8
(1.)
(2.)
Lowering the lift in the approximate
location shown on the image to the right.
Lubricate the points (3, 9), (4, 10) and
(5, 11) once again.
Z 10/15/20-130/150
3,
9
Tilt the platform a bit to avoid pressure against the body
work (1.) See position of the platform on the image to the
left, and lubricat all points. Tilt the platform to position (2.)
approximate 45° and lubricate the points (1, 7) , (2, 8) and
(6, 12), if it´s necessary, lower the lift a bit to reach points
(2, 8) and (6, 12). The points (1, 7) are now done.
4, 10
Lower the lift entirely as shown on the
image to the left. Lubricate all points a
last time, except (1,
be done already.
9
IE-0101
6, 12
5,
11
7) as they should