Zepro ZHD 1500 Service Instruction page 18

The lift has 16 lubrication points, see the encircled images below. On these images shows
the lubrication points on the lift's right side and are represented with black numbers (1-8).
On the left side of the lift are the lubrication points mirrored and are represented in text and
images below with red numbers (9-16).
1, 9
3, 11
Begin by lubricating the points 8 and 16,
there the lift cylinders are attached to the tilt
links, while the lift is still in transport mode.
Then lower the lift without folding the
platform, much like the picture to the right
shows. In this mode, lubricate points 1-4 and
9-12
ZR 10/15-135
2, 10
4, 12
6 5
Lower the lift to the ground and fold out the
6 5
bridge, see the picture to the left.
Then lubricate points 5-7 resp. 13-15.
NOTE! Advantageously lubricate all the
points accessible at the respective position
of the lift. That is, the same point more than
once, but at different positions.
It only results in a better spread of the grease
around the axles if you lubricate the same
point at different positions of the lift.
15
5, 13
8, 16
4 3
Title
ZR10/15-135 PF-1430x2200
Material
-
Dimension
Date Designer
2017-09-18 MJ
ZEPRO
Z-Lyften Produktion AB
A CARGOTEC BRAND
4 3
IE-0101
6, 14
7, 15
2 1
Used on: Drawing interpretation unless otherwise All measures intends finis
specified.
Lastbilsmontage IS0 tolerances and drawin
Welding:
Surface finish:
Sheet
Mat.Stock nr.
/
1 1
Tolerance:
Weight (kg) Stock nr.
-
Drawn Checked by Approved by Scale Drawing nr.
CM
EM-00427
2 1
Size
Revis