Zhz 500/600 / Zhd 3000 - Zepro ZHD 1500 Service Instruction

IE-0101
ZHZ 500/600
ZHZ 600 is lubrication free. It has axles of stainless steel and Dynaweave bearings at
all articulated points. They should not be lubricated at all, not even initial lubrication.
Therefore, lack of lubrication nipples.
Axles and bearings should be kept dry and clean on contact surfaces and are protected
against moisture and dirt with o-rings. Check o-rings regularly
ZHD 3000
ZHD 3000 has four grease points, these are on lifting cylinder axes, otherwise, the lift is
lubrication free. It has axles of stainless steel and Dynaweave bearings at all the other
pivoted points. They should not be lubricated at all, not even initial lubrication. Therefore,
lack of lubrication nipples on these places.
Axles and bearings should be kept dry and clean on contact surfaces and are protected
against moisture and dirt with o-rings. Check o-rings regularly
12