Table of Contents
Advertisement
IE-0101
The lift has ten lubrication points: two for each cylinder and four on the lift arm:
(See the oval images below with black frames). On these images shows the lubrication
points on the lift's right side and is represented with black numbers (1-6).
On the left side of the lift are the lubrication points mirrored, (except there are no lift
cylinder on left side) and is represented in text and images below with red numbers
(7-10).
1,
7
2
(1.)
(2.)
(3.)
Lowering the lift in the approximate location
shown on the image to the right. Lubricate
all the rest of the points once again.
Z 10-135
4,
8
3
Tilt the platform a bit to avoid pressure against the body
work (1.) See position of the platform on the image
to the left, and lubricat all points. Tilt the platform to
position (2.) and lubricate the points (1, 7) and (6, 10).
Tilt the platform further to position (3.) and lubricate the
points (6, 10) once more. The points (1, 7) and (6, 10)
are now done
Lowering the lift in the approximate location
shown on the image to the left. Lubricate all
points a last time. (Except the points (1,
and (6,
10
5,
9
10)
as they are already done.)
6,
10
7)
Hide quick links:
Advertisement
Table of Contents
