Main Function - ACME CB-16FC User Manual

SLAVE
SOUND
4.Button:
MENU
DOWN
UP
ENTER
5.Display:
To show the various menus and the selected functions.
6. MIC: To receive music for sound active.
7.POWER OUT:
Connect the main power supply to the next unit.
8.DMX OUT:
For DMX512 link, use 3-pin XLR cable to link the next unit and output DMX signal.

3.2 Main Function

To select any of the given functions, press the MENU button up to when the required one is
showing on the display. Select the function by ENTER button and the display will blink. Use the
DOWN/UP button to change the mode. Once the required mode has been selected, press the
ENTER button to setup, to go back to the functions without any change press the MENU button
again. Hold and press the MENU button about one second or wait for one minute to exit the menu
mode.
The main functions are showing below:
On
Flashing
To select the programming functions
To go backward in the selected functions
To go forward in the selected functions
To confirm the selected functions
5A
Slave Mode
Sound activation