ACME Theatre LED Colour Flood User Manual
  1. Manuals
  2. Brands
  3. ACME Manuals
  4. DJ Equipment
  5. Theatre LED Colour Flood
  6. User manual

ACME Theatre LED Colour Flood User Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
CYC-200 FC
User Manual
Please read the instruc on carefully before use

Advertisement

Table of Contents
loading

Related Manuals for ACME Theatre LED Colour Flood

Summary of Contents for ACME Theatre LED Colour Flood

  • Page 1 CYC-200 FC User Manual Please read the instruc on carefully before use...

  • Page 2: Table Of Contents

    CONTENTS 1. Safety Introductions ....................2 2. Technical Specifications ..................3 3. How To Set The Fixture ..................4 3.1 Control Panel ....................4 3.2 The Plate for Color Filter & Barn Door Installation .......... 5 3.3 Main Function ....................6 4.

  • Page 3: Safety Introductions

    1. Safety Introductions Please read the instructions carefully which includes important information about the installation, operation and maintenance. WARNING Please keep this User Manual for future consultation. If you sell the unit to another user, be sure that they also receive this instruction booklet. ...

  • Page 4: Technical Specifications

    Caution: There are no user serviceable parts inside the unit. Do not open the housing or attempt any repairs yourself. In the unlikely event your unit may require service, please contact your nearest dealer. Installation: The unit should be mounted via its screw holes on the bracket. Always ensure that the unit is firmly fixed to avoid vibration and slipping while operating.

  • Page 5: How To Set The Fixture

    3. How To Set The Fixture 3.1 Control Panel 1. Display: hows the various menus and the selected functions; 2. DMX IN : For DMX 512 link, use 5-pin XLR cable to link the unit to a DMX controller; 3. POWER IN: Connects to mains supply power; 4.

  • Page 6: The Plate For Color Filter & Barn Door Installation

    5. DMX OUT: For DMX 512 link, use 5-pin XLR cable to link to the next unit and output DMX signal; 6. Power Switch: Turns On/Off the power. 7. Button: MENU To select the programming functions DOWN To go backward in the selected functions To go forward in the selected functions ENTER To confirm the selected functions...

  • Page 7: Main Function

    3.3 Main Function To select any of the given functions, press the MENU button up to the required selection as shown on the display. Select the function with the ENTER button and the display will blink. Use the DOWN/UP buttons to change the mode. Once the required mode has been selected, press the ENTER button to confirm.
  • Page 8 DMX Settings To select DMX Settings, press the ENTER button to confirm, use the UP/DOWN button to select DMX Address, Channel Mode or View DMX Value. DMX Address To select DMX Address, press the ENTER button to confirm. Use the UP/DOWN button to adjust the address from 1 to 512, press the ENTER button to store.
  • Page 9 S-cure: Light intensity control is finger at low levels and high levels and coarser at medium levels. Dimmer Speed To select Dimmer Speed press the ENTER button to confirm, present mode will blink on the display, use the UP/DOWN button to select the SMOOTH (dimmer speed smooth) or FAST(dimmer speed fast) press the ENTER button to store.
  • Page 10 display, use the UP/DOWN button to select the English or Chinese, press the ENTER button to store. Press the MENU button back to the last menu or let the unit idle one minute to exit menu mode. Fixture Test To select Fixture Test press the ENTER button to confirm, present mode will blink on the display, use the UP/DOWN button to select the Auto Test or Manual Test press the ENTER button to store.

  • Page 11: How To Control The Unit

    4. How To Control The Unit You can operate the unit in two ways: 1. By master/slave function 2. By DMX controller You do not need to turn the unit off when you change the DMX address, the new DMX address setting will take effect immediately.

  • Page 12: Dmx512 Configuration

    4.3. DMX512 Configuration 4 Channel Mode: CHANNEL VALUE FUNCTIONS 000 ~ 255 0%  100% GREEN 000 ~ 255 0%  100% BLUE 000 ~ 255 0%  100% WHITE 000 ~ 255 0%  100% 9 Channel Mode: CHANNEL VALUE FUNCTIONS 000 ~ 255...
  • Page 13 LEE 117 – Steel Blue LEE 353 – Lighter Blue LEE 118 – Light Blue LEE 116 – Medium Blue Green LEE 124 – Dark Green LEE 139 – Primary Green LEE 089 – Moss Green LEE 122 – Fern Green LEE 738 –...

  • Page 14: Dmx512 Connections

    4.4. DMX512 Connections The DMX512 is widely used in intelligent lighting control, with a maximum of 512 channels. 1. At last unit, the DMX cable has to be terminated with a terminator. Solder a 120-ohm 1/4W resistor between pin 2(DMX-) and pin 3(DMX+) into a 3-pin XLR-plug and plug it in the DMX-output of the last unit.

  • Page 15: Troubleshooting

    5. Troubleshooting Following are a few common problems that may occur during operation. Here are some suggestions for easy troubleshooting: A. The fixture does not work, no light 1. Check the connection of power and main fuse. 2. Measure the mains voltage on the main connector. B.
  • Page 16 D eclaration of Conformity We declare that our products (lighting equipment) comply with the following specification and bears CE mark in accordance with the provision of the Electromagnetic Compatibility (EMC) Directive 89/336/EEC. EN55103-1: 2009 ; EN55103-2: 2009; EN62471: 2008; EN61000-3-2: 2006 + A1:2009 + A2:2009; EN61000-3-3: 2008. &...

This manual is also suitable for:

Cyc-200fc

Table of Contents