ACME CB-16FC User Manual page 10

DMX State
Press the MENU button up to when the
Use DOWN and UP button to select the
(last state). Once the mode has been selected, press the ENTER button to setup, to go
back to the functions without any change press the MENU button again. Hold and press the MENU
button about one second or wait for one minute to exit the menu mode.
LED
Press the MENU button up to when the
and the display will blink. Use DOWN and UP button to select
Once the mode has been selected, press the ENTER button to setup, to go back to the functions
without any change press the MENU button again. Hold and press the MENU button about one
second or wait for one minute to exit the menu mode.
Display Inversion
Press MENU button until
select (normal) or
ENTER button to setup, to go back to the functions without any change press the MENU button
again. Hold and press the MENU button about one second or wait for one minute to exit the menu
mode.
White Balance
Press the MENU button to show
will blink. Use the DOWN and UP button to select
(Blue). And adjust the value from 125 to 255, Once the mode has been selected, press
the ENTER button to setup, to go back to the functions without any change press the MENU
button again. Hold and press the MENU button about one second or wait for one minute to exit
the menu mode.
is shown on the display. Pressing ENTER button,
(master slave),
is shown on the display. Pressing ENTER button
is blinking on the display. Use the DOWN and UP button to
(inverse), Once the mode has been selected, press the
on the display. Press the ENTER button and the display
9A
(blackout mode) or
(On) or
(Red), (Green) or
(Off),