Auto Test
Press the MENU button up to when the
button and the unit will run the built-in programmer for self-test. To go back to the functions press
the MENU button.
Fixture Temperature
Press the MENU button up to when the
button and the display will show the number of working hours of the unit. To go back to the
functions press the MENU button.
Fixture Hours
Press the MENU button up to when the
button and the display will show the temperature of the unit. To go back to the functions press the
MENU button.
Software version
Press the MENU button up to when the
button and the display will show the version of software of the unit. To go back to the functions
press the MENU button.
Reset
Press the MENU button up to when the
functions press the MENU button.
4. How To Control The Unit
You can operate the unit in three ways:
1. Master/slave built-in preprogram function
2. Universal DMX controller
is blinking on the display. Press the ENTER
is blinking on the display. Press the ENTER
is blinking on the display. Press the ENTER
is blinking on the display. Press the ENTER
is blinking on the display. To go back to the
10A