Activating The Manual Mode Menu; Resetting Or Restoring Settings; Restoring To Factory Settings - DeDietrich EVODENS PRO Amc 45 Service Manual

Fig.102 Step 2
Fig.103 Step 3
Fig.104 Step 4
Fig.105 Step 5
6.6

Resetting or restoring settings

Fig.106 Step 2
Fig.107 Step 3
Fig.108 Step 4
Fig.109 Step 5
7725106 - v.01 - 05062019
Status and Sub-status
The information menu
For more information, see
List of measured values, page 32
6.5.2

Activating the manual mode menu

In some cases, it may be necessary to set the device to manual mode, for
example when the controller has not yet been connected.
1. Navigate to the manual mode menu.
2. Press the
MW-3000302-01
3. Press the
manual mode.
MW-3000303-01
4. Press the
Manual mode is switched on.
MW-3000304-01
5. Press the
Manual mode is switched off.
MW-3000305-01
6.6.1

Restoring to factory settings

1. Navigate to the Installer menu.
2. Press the
MW-3000312-01
3. Keep pressing the
MW-3000313-01
4. Press the
MW-3000314-01
5. Keep pressing the
displayed.
MW-3000406-01
gives the Status and Sub-status numbers.
key to open the menu.
or keys to modify the required flow temperature in
key to confirm the value.

key twice to go back to the main display.
key to open the menu.
key until the code
key to confirm opening the menu.
key until the required device or PCB is
6 Installer instructions
is displayed.
AMC Pro 23