Installer Instructions; Changing Installer Parameters - DeDietrich EVODENS PRO Amc 45 Service Manual

6 Installer instructions

6 Installer instructions
6.1

Changing installer parameters

Fig.61 Step 2
Fig.62 Step 3
Fig.63 Step 4
Fig.64 Step 5
Fig.65 Step 6
Fig.66 Step 7
Fig.67 Step 8
Fig.68 Step 9
Fig.69 Step 10
18 AMC Pro
The parameters in the Installer Menu must only be changed by a qualified
professional. Code
parameters.
Important
First, select a device, control PCB or zone to view or amend a
setting.
Caution
Modification of the factory settings may impair operation of the
device, control PCB or zone.
1. Navigate to the Installer menu.
2. Press the
MW-3000312-01
3. Keep pressing the
MW-3000313-01
4. Press the
MW-3000314-01
5. Keep pressing the
zone is displayed.
MW-3000406-01
6. Press the
MW-3000407-01
7. Keep pressing the
displayed.
MW-3000315-01
8. Press the
MW-3000336-01
9. Press the
MW-3000337-01
10. Press the
MW-3000338-01
must be entered in order to change the
key to open the menu.
key until the code
key to confirm opening the menu.
key until the required device, control PCB or
key to confirm the selection.
or key until the required parameter is
key to confirm the selection.
or key to modify the value.
key to confirm the value.
is displayed.
7725106 - v.01 - 05062019