Changing The Domestic Hot Water Temperature; Setting The Timer Program - DeDietrich EVODENS PRO Amc 45 Service Manual

5 User instructions
Fig.39 Step 5
5.4

Changing the domestic hot water temperature

Fig.40 Step 1
Fig.41 Step 2
Fig.42 Step 3
5.5

Setting the Timer Program

Fig.43 Step 2
Fig.44 Step 3
Fig.45 Step 4
14 AMC Pro
5. Press the
MW-3000370-01
The temperature of the domestic hot water can be changed as needed.
Important
The domestic hot water temperature can only be adjusted in this
way if a domestic hot water sensor is installed.
1. Press the
MW-3000371-01
2. Press the
MW-3000368-01
3. Press the
MW-3000369-01
If a timed thermostat is not being used, the timer program for the
appliance can be used. The Timer Program can be used to lower the
heating temperature during the night or an absence during the day. A start
and end time for the lower temperature can be set in the Timer Program.
Important
Activate the timer program using the parameter:
The timer program can be set for each zone (heating, domestic
hot water or cooling).
1. Navigate to the Counter menu.
2. Press the
MW-3000320-01
3. Keep pressing the
If there is only a direct heating group, the only option that appears is
CIRCA (circuit A).
MW-3000404-01
4. Press the
The icons dedicated to the days of the week all flash at the same
time:
MW-3000405-01

key to go back to the main display.
key to select the domestic hot water temperature.
or key for the required temperature.
key to confirm the value.
key to open the menu.
key until the required zone is displayed.
key to confirm the selection.
.
7725106 - v.01 - 05062019