Table of Contents
Advertisement
5 Settings
Tab.4
Selectable tiles for the user
Tile
Menu
Information menu.
Error indicator.
Holiday mode.
Gas boiler indicator.
Water pressure indicator.
Heating circuit set-up.
,
,
,
,
,
,
DHW setup.
Outdoor sensor setup.
5.3
Activating holiday programs for all zones
5.4
Heating circuit configuration
Tab.5
Menu to configure domestic hot water
Menu
Régler les températures de chauffage
Mode de fonctionnement
14
DIEMATIC Evolution - C140
Function
Read out various current values.
Read out details about the current error.
With some errors the
icon will appear with installer contact details (when
filled in).
Set the start and end date of your holiday to lower the room and domestic hot
water temperatures of all zones.
Read out burning details of the boiler and switch the heating function of the
boiler on or off.
Shows the water pressure. Top up the installation when the water pressure is
too low.
Configure the settings per heating circuit.
Configure the domestic hot water temperatures.
Configure the temperature regulation using the outdoor sensor.
If you go on holiday, the room temperature and domestic hot water
temperature can be reduced to save energy. With the following procedure
you can activate the holiday mode for all zones and domestic hot water
temperature.
1. Select the tile [
].
2. Press the
button to confirm the selection.
The Holiday Mode menu opens.
3. Use the rotary knob to select Start date holiday.
4. Press the
button to confirm the selection.
The current date is displayed as start date of your holiday.
5. Change the start date, if necessary.
6. Press the
button to confirm the selection.
7. Use the rotary knob to select End date holiday.
8. Press the
button to confirm the selection.
The day after the start date of your holiday is displayed.
9. Change the end date, if necessary.
10. Press the
button to confirm the selection.
11. Use the rotary knob to select Wished room zone temperature on
holiday period.
12. Press the
button to confirm the selection.
The room temperature for the holiday period is displayed.
13. Change the temperature, if necessary.
14. Press the
button to confirm the selection.
You can reset or cancel the holiday program by selecting Reset in the
holiday mode menu.
For every heating circuit there is a quick user settings menu available.
Select the heating circuit you want to configure by selecting the tile [
[
], [
], [
], [
], [
Function
Set the temperatures for the timer program.
Set the operating mode.
] or [
]
],
7745361 - v03 - 29112021
Advertisement
Table of Contents
