5 Installer instructions
Fig.91
Step 2
Fig.92
Step 3
5.6
Connected control PCBs
Fig.93
Step 2
Fig.94
Step 3
Fig.95
Step 4
5.7
Activating the manual mode menu
Fig.96
Step 2
Fig.97
Step 3
Fig.98
Step 4
Fig.99
Step 5
20
2. Press the
The device is now running at full load. Wait until
pears on the display.
MW-3000326-01
3. Press the
MW-3000327-01
1. Navigate to the control PCB menu.
2. Press the
MW-3000339-01
3. To see which control PCBs are connected, press the
MW-3000340-01
4. Press the
MW-3000341-01
In some cases, it may be necessary to set the device to manual mode, for
example when the controller has not yet been connected.
1. Navigate to the manual mode menu.
2. Press the
MW-3000302-01
3. Press the
manual mode.
MW-3000303-01
4. Press the
Manual mode is switched on.
MW-3000304-01
5. Press the
Manual mode is switched off.
MW-3000305-01
key twice.
key to go back to the main display.
key to open the menu.
key twice to go back to the main display.
key to open the menu.
or
keys to modify the required flow temperature in
key to confirm the value.
key twice to go back to the main display.
ap
key.
7667004 - v.01 - 12072017