8 Control panel settings IniControl 2
Fig.42
Accessing the domestic hot water
production parameters
Fig.43
Confirmation of the domestic hot wa
ter circuit
MW-3000271-2
Fig.44
Accessing the menus
MW-5000009-3
32
EFU
For more information, see
Browsing in the menus, page 19
User menu, page 27
8.2.3 Setting the domestic hot water temperature
Note
The name of the PCB is displayed. Check that it is actually the
PCB on which the setting must be made.
1. Access the domestic hot water production parameters by pressing
the
MW-6000254-1
2. Display the domestic hot water production circuit parameters by
pressing the
The name of the circuit and the domestic hot water temperature set
point are displayed alternately.
3. Access setting of the domestic hot water temperature set point by
pressing the
4. Set the domestic hot water temperature set point by pressing
5. Confirm the new temperature set point by pressing the
Note
Press the
For more information, see
Browsing in the menus, page 19
User menu, page 27
8.2.4 Activating Manual Forcing
Note
The name of the PCB is displayed. Check that it is actually the
PCB on which the setting must be made.
1. Access the menus by pressing the two keys on the right simultane
ously.
key twice.
key.
key.
key.
key to cancel all input.
or
key.
7615193 - v01 - 09072015