Browsing In The Menus - DeDietrich EVODENS PRO Amc 45 Service Manual

The circulation pump is running.
ECO mode is active.
Switch the appliance off then on again.
4.3

Browsing in the menus

Fig.3 Step 1
Fig.4 Step 2
Fig.5 Step 3
Fig.6 Step 4
Fig.7 Step 5
Fig.8 Step 6
Fig.9 Step 7
7725106 - v.01 - 05062019
Important
Depending on the devices or control PCBs connected, the
control panel shows selection options in some menus.
First, select a device, control PCB or zone to view or amend a
setting.
1. Press any key to activate the controller from the stand-by screen.
MW-3000377-02
2. Access the available menu options by pressing the two keys on the
right simultaneously.
Tab.3
MW-3000299-01
Information Menu
User menu
Installer Menu
Manual mode menu
Failure Menu
Hour Run Meters / Timer Program / Clock menu
PCB menu
(1) The icon is displayed only if an optional control PCB has been instal­
led.
3. Press the
MW-3000300-02
4. Press the
MW-3000301-02
5. Press the
parameter.
MW-3000302-01
6. Press the
MW-3000303-01
7. Press the
MW-3000304-01
Possible menu choices
(1)
key to move the cursor to the right.
key to move the cursor to the left.
key to confirm selection of the required menu or
or key to modify the value.
key to confirm the value.
4 Use of the control panel
AMC Pro 9