Configuring the WAN Bridging/Routing Sessions
Add a Bridging/Routing WAN Session
You add a bridging/routing WAN session in the
following reference table and procedure to set up a session.
Information
Service Name
ATM VPI
ATM VCI
Bridging
Enable
Port Priority
Routing
Enable
IP Address
IP Net Mask
RIP Direction
RIP Version
66
Description
A unique descriptive identifier of the session that also displays in the connection
field.
Virtual Path Identifier (VPI) identifies the virtual path that transports ATM cells in a
virtual Channel. The range of values is 0 to 15.
Virtual Channel Idenifier (VCI) identifies a virtual channel for each session (each
session is a virtual channel). Can be a number from 32 up to a maximum of 253 (on
VPI 0, VDIs 254 and 255 are reserved), with the first 32 (0 through 31) reserved.
The function of filtering/forwarding frames based on layer 2 headers.
Enables/Disables bridging.
The priority of the WAN port.
The function of routing packets based on layer 3 headers.
Enables/Disables routing.
The IP address of the modem's WAN port.
The IP Net Mask address of the modem's WAN port.
The direction the RIP routing information flows.
The version of the RIP protocol.
WAN Port Configuration
Megabit Modem 400F, 500L, 600F, and 700F User Manual
window. Use the