Defining Static NAT Entries
D
S
EFINING
Static NAT entries are used in PPP Over ATM mode. They are required only for applications
that use TCP/UDP connections initiated from the remote end (WAN). Through the
, you can map inbound traffic from a remote user to a user or a logical port on your LAN.
Table
You can enter a maximum of 32 static NAT entries. See
and an example application.
1
From the
system
40
NAT E
TATIC
menu, click
static NAT table
NTRIES
page 87
for more information on NAT
to open the Static NAT Table window.
Megabit Modem 400F, 500L, 600F, and 700F User Manual
Static NAT