Hardware; Installation Kit - ADC 600F User Manual

Hardware

H
ARDWARE
The following provides additional information about Megabit Modem 400F, 500L, 600F, and
700F such as the installation kit and modem connectors pinouts.

Installation Kit

The following items are included in the installation kit and are used to install the Megabit
Modem 400F, 500L, 600F, and 700F as shown in
Part Description
Rubber feet Four black rubber feet
Grey cable Silver-satin phone cord with 4-pin modular
plugs (straight-through)
Black cable CAT 5, cable with 8-pin modular plugs
(straight-through)
Power cable Power supply with optional power cord (this
item is ordered dependent on the type of
power supply and cord required for your
location)
1
Screws Two 6x
Grey cable Flat cable with RJ-45 connectors and a DB-9
and adapter to RJ-45 adapter.
100
/ -inch sheet metal screws
2
Chapter 3 on page
Function
Attaches to the base of the modem.
Connects the modem ADSL connector to the
wall phone jack for access to the Internet.
Connects the modem 10/100BASE-T connector
to the LAN through a hub or to a PC NIC.
Connects the modem POWER connector to the
local power source.
Installs into a wall for wall-mounting modems.
Connects the RS-232 MGMT port to an ASCII
terminal or a PC running terminal emulation
software. Adapter assembly connects to a DB-9
connector on the PC. Then, one RJ-45 connector
installs in the adapter and the other connector
into the console port on the modem.
Megabit Modem 400F, 500L, 600F, and 700F User Manual
18.