ADC 600F User Manual page 3

A T
BOUT HIS
Use this manual to install and configure the Megabit Modem
This manual provides instruction on:
•
information you will need to configure the modem
•
unpacking and inspecting the modem for installation
•
installing the modem
• setting up parameters for your applications that will be used to configure the modem
•
configuring system parameters
• configuring sessions between the modem and a service provider
•
monitoring and troubleshooting the modem
Chapter 10 provides a reference for the technology implemented in the Megabit Modem 400F,
500L, 600F, and 700F. This chapter covers information about ATM over ADSL transmission,
operating modes of PPP or bridging/routing, and SNMP management.
IP addresses used in this manual are for example only. You will acquire your own addresses
from the service provider and your information services coordinator to configure the Megabit
Modem 400F, 500L, 600F, and 700F. However, you will use the IP address specified in
"Accessing the Modem Web Pages" on page 27
600F, and 700F from a Web browser.
D C
OCUMENT
Two types of messages, identified by icons, appear in the text.
Notes contain information about special circumstances.
Cautions indicate the possibility of equipment damage or the possibility of
personal injury.
Megabit Modem 400F, 500L, 600F, and 700F User Manual
U M
SER ANUAL
ONVENTIONS
®
400F, 500L, 600F, and 700F.
to access the Megabit Modem 400F, 500L,
About This User Manual
iii