Setting Up The Pc To Configure The Modem - ADC 600F User Manual

Setting Up the PC To Configure the Modem

S U
ETTING P THE
Set up your PC to be on the same IP subnet as the modem. Since the modem default uses DHCP,
it will automatically configure your IP settings once you set up that option. If you want to view
or change the default IP address for the modem, see
page 80.
The following is an example of how to set up a PC running Microsoft Windows 98.
1 Open the Control Panel
2 From the Configuration tab, double-click
3 If DHCP has been enabled on the modem (default), select
address automatically
4 Enter IP Address
address from the following range: 192.168.0.2 to 192.168.0.254. The default subnet mask
is 255.255.255.0.
5 Click OK to close the TCP/IP Properties window.
6 Click OK to close the Network window.
7 Click to restart the computer.
OK
24
PC T
O
then double-click the
and skip to step 5. Otherwise, select
and Subnet Mask. The default LAN IP address is 192.168.0.1. Use an IP
C
ONFIGURE THE
"Using the RS-232 Management Port" on
Network icon.
TCP/IP .
Obtain an IP
Specify an IP address
Megabit Modem 400F, 500L, 600F, and 700F User Manual
M
ODEM
.