Table of Contents
Advertisement
Configuring System Security
C
ONFIGURING
System security includes the use of the Admin IP Address and configuring console access
through the RS-232 MGMT port.
Admin IP Address
This address determines which devices on the LAN can manage the Megabit Modem. You can
select:
•
limited access where only one device on the LAN can manage the modem
•
general access where any device on the LAN can manage the modem
Perform the following to configure administration for your modem:
1
From the
system
2
Select one of the following and enter the appropriate IP address:
a
When you allow only one device on the LAN to manage the modem, enter the
IP address for that one device in the IP address field.
b
When you allow any device on the LAN to manage the modem, enter
IP address field.
3
Click
Apply
to activate the changes.
Example: The illustration above shows the modem configuration to allow only the station with
the IP address 192.168.0.3 to access the modem on the same LAN.
46
S
S
YSTEM
ECURITY
menu, click
general
to open the General System window.
Megabit Modem 400F, 500L, 600F, and 700F User Manual
0.0.0.0
in the
Advertisement
Table of Contents
Troubleshooting
