Table of Contents
Advertisement
Defining SNMP Parameters
D
SNMP P
EFINING
The modem has an SNMP agent that allows it to be managed remotely by a Network
Management System (NMS). See
through SNMP. Use the following table for a description of the SNMP parameters:
Information
Enable Trap Sending
Trap Server IP Address
Trap Server Net Mask
Trap Community String The authentication string of the server receiving the traps. The default
Read-Only Community
String
Read-Write Community
String
1
From the
system
general
to open the General
System window.
2
Select
Enable Trap Sending
you want the modem to send
traps to a server.
3
Enter the
Trap Server IP
Address
for the server that the
traps will be sent to.
4
Enter the
Trap Server Net Mask
(subnet mask) for the server
that the traps will be sent to
from the modem.
You can change the community strings to names you choose. The fields have
default names as shown in the screen on
change the name, however, the community string names must match on both
the manager and agent to allow access to the SNMP function.
38
ARAMETERS
page 91
for more information about managing the modem
Description
Enables/Disables SNMP messages to the trap server.
The IP address of the server receiving the traps.
The subnet mask of the server receiving the traps.
string is public.
The authentication string for only viewing the modem
statistics/parameters. The SNMP management station must have the
same string in its configuration. The default is public.
The authentication string for viewing the modem statistics and
changing parameters. The SNMP management station must have
the same string in its configuration. The default is private.
menu, click
if
page 39
and are case sensitive. If you
Megabit Modem 400F, 500L, 600F, and 700F User Manual
Advertisement
Table of Contents
Troubleshooting
