Rs-232 Mgmt Port - ADC 600F User Manual

You can change the Admin IP Address for the 600F and 700F by physically
connecting to the RS-232 MGMT port.

RS-232 MGMT Port

The RS-232 MGMT Port allows access to several parameters such as the LAN IP settings,
Admin IP Address, and modem reset.
These parameters can be vital to the operation of the modem. You should password protect the
RS-232 MGMT port:
1 Access the console prompt by
Management Port" on page
2 At the main menu, enter
3 At the Enter Choice
RS-232 port access. If one has not been previously
configured, press
4 When a "Please enter the new password:" message
appears, type in the new password.
5 When a "Please retype the new password:" message
appears, retype the new password.
6 When the "Password accepted" message appears,
you have changed the password successfully.
Megabit Modem 400F, 500L, 600F, and 700F User Manual
""Using the RS-232
80"
6 .
prompt, enter the password for
without entering a password.
Enter
Chapter 5: Configuring System Settings
47