Configuring Static Routes; Display Static Routes; Add A Static Route; Modify A Static Route - ADC 600F User Manual

Configuring Static Routes

C
ONFIGURING
Information
Destination
Net Mask
Gateway

Display Static Routes

1 From the system menu, click static route table to open the Static Route Table window.
2 Observe the list of static routes.

Add a Static Route

1 From the system
2 Click to display the Static Route Entry window.
Add
3 Configure the static route parameters as defined above.
4 Click Apply to add the new data to the list.

Modify a Static Route

1 From the
system
2 Click Select of the route to be changed.
3 Configure the static route parameters as defined above.
4 Click OK to change the existing data to the list.
44
S R
TATIC OUTES
Description
The destination IP address of the packet.
The destination subnet mask of the packet.
The next hop IP address the packet will be forwarded to.
menu, click static route table
menu, click
static route table
to open the Static Route Table window.
to open the Static Route Table window.
Megabit Modem 400F, 500L, 600F, and 700F User Manual