Configuring Rfc 1483 Bridging/Routing Sessions - ADC 400F User Manual

C
ONFIGURING
S
ESSIONS
You can configure the modem as a bridge to forward Ethernet data based on MAC addresses,
as a router to route Ethernet-encapsulated IP datagrams based on IP addresses, or as both. From
the EasySession pages, configure parameters for communicating between the modem and the
service provider over the WAN
between the LAN and the modem
WAN and LAN parameters, select the sessions that you want to activate (see
1 Click EasySession
2 Click next to any
Edit
selected port.
Megabit Modem 400F User Manual
RFC 1483 B
(page 38). Then, configure parameters for communicating
(page 41). After setting up all appropriate Bridge/Router
on the Main Menu to access the
field to display the
Port 1-32
Chapter 6: Configuring Sessions
/R
RIDGING OUTING
EasySession page.
Brouter WAN Port Configuration
page 46).
page for the
37