ADC 600F User Manual page 59

Use the following procedure to set the system mode:
1 From the system
click general
General System window.
2 Select the
PPP Over ATM
Bridge/Router RFC1483
from the drop-down menu
as indicated by your
service provider.
3 Click Apply .
4 At the Proceed message,
click OK .
5 Click reset unit
modem and activate the
changes.
6 At the System Reset
message, click
Megabit Modem 400F, 500L, 600F, and 700F User Manual
menu,
to open the
or
to reset the
Proceed .
Chapter 5: Configuring System Settings
49