Patient Care
This chapter describes general patient care procedures.
Bathing the Patient
Move the bed to the horizontal position and push in the lock pin.
■
If necessary, remove the positioning pads to gain access to the front
■
of the body and to the patient's limbs. Wash and dry the patient as normal.
To wash the patient's dorsal surface, open one each of the access hatches in the
■
head, thorax and posterior area, as described in the section on access hatches.
When opening the access hatches, the system should be at maximum height and
■
maximum lateral rotation to reduce the strain on the caregiver's spine.
After Bathing the Patient
Make sure that the patient's skin is clean and dry.
■
Make sure that all access hatches are fully closed and locked.
■
Replace all the positioning pads and check the patient's position,
■
as described in the, Positioning the Patient, chapter.
Skin Care
As the rotational movement provides pressure relief, it is recommend the bed not
■
remain in a stationary position for a period greater than two hours or as indicated
by the treating physician.
Make sure that the patient's skin is kept clean and dry at all times,
■
as described above.
39
Need help?
Do you have a question about the Arjohuntleigh RotoRest System and is the answer not in the manual?