Obstacle Alarm - Getinge Arjohuntleigh RotoRest System Operating Instructions Manual

Obstacle alarm

Two situations can cause the bed to block.
1. The bed rotates away from its zero (horizontal) position.
If the bed platform hits an obstacle, the bed will stop and an alarm will
■
sound. The screen displays the message, Obstruction Alarm. The bed returns
to its zero position, where it remains. The alarm continues to sound and the
obstruction message is displayed on the screen. Remove the obstacle and
then press the Obstacle Alarm button. The bed will now continue to rotate
normally.
2. The bed rotates towards its zero position.
If the bed platform hits an obstacle, an alarm will sound and the screen
■
displays the message, Obstruction Alarm. The bed stops and remains in this
position. Press the release lever and turn the bed away from the obstacle.
Remove the obstruction and then press the Obstacle Alarm button – the bed
will continue to rotate normally.
26