Figure 93 Connection Example With A Dedicated Remote Support Port - Fujitsu ETERNUS AF250 Design Manual
All-flash arrays
Hide thumbs
Also See for ETERNUS AF250:
- Setup manual (12 pages) ,
- User manual (423 pages) ,
- Configuration manual (171 pages)
Table of Contents
Advertisement
2.
Connection Configuration
LAN Connection
■
Connection Configurations
For the ETERNUS AF, two IP addresses are required (one IP address for the MNT port and one IP address for the
RMT port).
Figure 93 Connection Example with a Dedicated Remote Support Port
Administration
terminal
IP address C
Different LANs are used for MNT ports and RMT ports.
SNMP
E-mail server
manager
LAN switch
IP address A
CM#0
Controller enclosure
ETERNUS AF
FUJITSU Storage ETERNUS AF250 S2, ETERNUS AF250 All-Flash Arrays Design Guide (Basic)
Copyright 2019 FUJITSU LIMITED
NTP server
Authentication
Syslog server
server
LAN for operation management
CM#1
Remote support
center
139
Router
P3AG-1822-09ENZ0
Advertisement
Table of Contents
